The log at 3.5km has been partially cleared. I was able to get my 2 door jeep through the gap with the help of a very good spotter, but it was a tight squeeze.
Just adding some photos to supplement Cara's post. Deep ruts start not far from the turn off from Lillooet FSR to Salal FSR. Early ones can be bypassed by moderate clearance SUVs or crossovers but it gets worse at several spots along the road. We saw a Ford F150 and a lifted Subaru Outback parked at the log across the road, but I would caution against trying without a high clearance 4x4.
Made it to 3.5km in a RAV4, where further passage was blocked by a downed tree. Road has some water bars and washout. Beyond the downed tree road condition looked okay up until the 6km mark where it has been permanently deactivated (culverts removed) with large water bars
[From Wes L] - Blockade at ~3.5km mark that adds an extra 6km of road walking to reach. It's possible this was in place to support the wildlife closures and may be removed on the 15th of June.
Vehicle
Road Conditions & Features
Unknown
- Road condition is unknown
Good Condition
- Road is 2WD driveable in most cases or easily driven in a 4WD.
Somewhat Degraded
- Road has rough spots, water bars or moderate washouts and may require high-clearance 4WD
Heavily Degraded
- Road requires high clearance 4WD. There may be challenging washouts, dangerous sections or exceptionally deep water bars.
Impassable
- Road is impassable or requires highly specialized vehicles to drive
Note that gates, avalanches and snow lines should not qualify a road as impassible.
Verifying an existing feature
Click on any feature for the selected road and use the "Check-In" button to verify or modify the status of the feature.
Adding a missing feature
If a bridge, gate or impasse is missing, you can easily add it to the map. See the video below: